Welcome to KNJ bearing 中文版 ENGLISH
+86-13963009636

You are here:Home > NEWS

Check some common sense specifications for bearings!

2021-08-26

The range of use of bearings is very wide! Many equipment that need to run during production use such products! When purchasing bearings, pay attention to some common sense specifications required to check the bearings.
Common sense specification for bearings
(1) What are the inspection items of bearing products and why they should be inspected;
(2) What preparations need to be made before the quality inspection of bearing products and why;
(3) Under what conditions, methods and instruments are used for each inspection item of bearing products, and within what scope of public service is necessary for the inspection results to be qualified;
(4) Which specification is used for the inspection of bearing products;
(5) Sometimes the batch of bearing products is very large, so it is impossible to carry out 100% inspection. Then what kind of sampling plan should be selected and how many quantities should be selected for inspection, so as to more fully and reliably represent the quality of imported bearings of the whole product, and what specifications should be used to measure the inspection results, so as to determine that this batch of products is a qualified batch that should be borne, Or the unqualified batch that should be rejected.
These five points are some codes of conduct when we check the bearing, which you can understand! After all, such products are widely used in our life! There are also various uses of such bearings! Different types of bearings are used in different places! Therefore, we need to know more about the common sense of bearings!

Prev:Several common wrong methods of installing bearings!

Next:Analysis on preload target and precautions of deep groove ball bearing