Welcome to KNJ bearing 中文版 ENGLISH

You are here:Home > PRODUCTS > Deep groove ball bearing

61904 Deep groove ball bearing

61904 Deep groove ball bearing

New Model 61904 Old Model 1000904
d(mm) 20 D(mm) 37
H(mm) 9 W(kg) 0.036
Cr(kN) 6.4 Cor(kN) 3.7
Grease speed(r/min) 17000 Oil speed(r/min) 22000
Type Deep groove ball bearing
Tel +86-635-2819662

Bearing sample drawing

Introduction of bearing information

The original list of deep groove ball bearings is a radial ball bearing and is the most widely used type of rolling bearing. It is characterized by low frictional resistance and high rotational speed. It can be used on parts with radial load or combined load of radial and axial action. It can also be used on parts with axial load, such as small power motors. Automobile and tractor gearboxes, machine tool gearboxes, general machines, tools, etc.

Deep groove ball bearings are the most commonly used rolling bearings. Its structure is simple and easy to use. It is mainly used to bear radial load, but when it increases the radial clearance of the bearing, it has certain angular contact ball bearing performance and can withstand combined radial and axial loads. It can also be used to withstand pure axial loads when the rotational speed is high and thrust ball bearings are not suitable. Compared with other types of bearings of the same size as deep groove ball bearings, these bearings have a small coefficient of friction and a high limit speed. However, it is not resistant to impact and is not suitable for heavy loads.

Recommended bearing model