Welcome to KNJ bearing 中文版 ENGLISH
+86-13963009636

You are here:Home > PRODUCTS > Cylindrical roller bearing

NU2305E Cylindrical roller bearing
Name

NU2305E Cylindrical roller bearing

New Model NU2305E Old Model 32605E
d(mm) 25 D(mm) 62
H(mm) 24 W(kg) 0.355
Cr(kN) 53.2 Cor(kN) 54.5
Grease speed(r/min) 9000 Oil speed(r/min) 12000
Type Cylindrical roller bearing
Tel +86-635-2819662

Bearing sample drawing

Introduction of bearing information

Cylindrical rollers and raceways are line contact bearings. Load capacity, mainly bear radial load. The rolling element has little friction with the ferrule rib and is suitable for high speed rotation. According to the ferrule with or without ribs, it can be divided into single row cylindrical roller bearings such as NU, NJ, NUP, N, NF, and double row cylindrical roller bearings such as NNU and NN. The bearing is a structure in which the inner ring and the outer ring are separable.

Cylindrical roller bearings with no ribs on the inner or outer ring, the inner and outer rings can move relative to the axial direction, so they can be used as free end bearings. A cylindrical roller bearing with a single rib on one side of the inner and outer rings and a single rib on the other side can withstand a certain degree of axial load in one direction. Steel stamping cages or copper alloy solid cages are commonly used. However, some use polyamide shaped cages.

Recommended bearing model